Before using your I LOCK IT Pro for the first time, you should fully charge the battery. To do this, carry out the following steps:
- Open the USB-C cover on the right-hand side of I LOCK IT Pro
- Connect the supplied USB cable to the USB-C charging port on the I LOCK IT Pro
- Connect the USB cable to a USB power supply unit, battery pack or the USB port of a computer
- To charge I LOCK IT Pro, only use power sources that supply the USB output with 5 V direct current (DC)
- While I LOCK IT Pro is charging, the button lights up red. When the battery is full, the LED goes out. The charging time depends on the charge status and the power supply unit used.
If there is no power socket near the bike, we recommend charging it using a battery pack to avoid removing it from the bike.
- As soon as I LOCK IT Pro is fully charged, you can remove the USB-C cable and close the USB-C cover again
- If the battery reaches a low charge level, an acoustic warning tone is emitted each time the lock is opened. The battery should then be recharged to ensure that I LOCK IT Pro is always ready for use.
Please note:
Charging the I LOCK IT Pro with a USB-C to USB-C cable with power delivery plug is not available.