If your bike does not have threaded bushes for mounting I LOCK IT Pro, then I LOCK IT Pro can be mounted easily and securely with the optionally available installation adapters.
To do this, carry out the following steps:
The installation adapters have flexible screw mounts that can be adjusted laterally. This allows even more leeway in the frame width of the bike.
- Attach the appropriate installation adapter to one of the frame struts
- Guide the plastic straps (1) around the strut and then through the openings on the installation adapter
- Insert the plastic screws into the installation adapter
- Use a suitable screwdriver to tighten the installation adapter by turning the plastic screw.
- Repeat the process for the second installation adapter
- Guide I LOCK IT Pro over your mudguard or tyre
- Screw I LOCK IT Pro to the threaded sockets of the installation adapter using an Allen key hand-tight (3 Nm).
Use the mounting screws supplied with I LOCK IT Pro for this.
The protruding plastic straps of the installation adapter can be removed with a side cutter.
Our I LOCK IT channel at www.youtube.de provides a video on the subject of installation.
https://www.youtube.com/watch?v=QMv3iNixueQ