Keyfob V3 & V4
Battery level critical:
- The keyfob LED starts flashing red
- Battery needs to be changed
- The keyfob requires a button cell type CR2025 or CR2032 for power supply
Perform the following steps to change the batteries:
- Open the battery cover by carefully prying apart the two halves on the keychain loop using your fingernail or a flathead screwdriver
- Remove the old battery and dispose it properly
- Insert a new battery into the battery compartment
- Close the battery cover by pressing both halves together
The key fob is now fully operational again.
INFO:
All settings remain during the battery replacement, and no renewed initial setup on I LOCK IT must be performed.
Key Fob V2
Battery level critical:
- The keyfob LED starts flashing red
- Battery needs to be changed
- The keyfob requires a button cell type CR2032 for power supply
Perform the following steps to change the batteries:
- Open the battery cover by placing the key fob between your palms.
- Turn the back cover clockwise to open it
- Remove the old battery and dispose it properly
- Insert a new battery into the battery compartment
- Close the battery cover by turning it counterclockwise
The key fob is now fully operational again
INFO:
All settings remain during the battery replacement, and no renewed initial setup on I LOCK IT must be performed.
Key Fob V1
Battery level critical:
- The keyfob LED starts flashing red
- Battery needs to be changed
- The keyfob requires a button cell type CR2032 for power supply
Perform the following steps to change the batteries:
- Open the back battery cover by turning the cover clockwise with a coin, for example
- Remove the old battery and dispose it properly
- Insert a new battery into the battery compartment
- Close the battery cover by turning it counterclockwise
The key fob is now fully operational again
INFO:
All settings remain during the battery replacement and no renewed initial setup on I LOCK IT has to be performed.